Braces, Hand Drills, Drill Bits

 

Home

 Find Your Tool Fast by clicking Here        Search New this week Stanley Parts, blades, etc Orders email Stuart

 

 Braces, drills, wood bits, screwdrivers, breast drills, brace bits
#1877 Stanley Sign, 17 1/2" long and 4 3/4" wide, hard plastic, I do not know what they are off, hard to find and get.  A$ 35 each
#5507 Solid Brass #5 Sweep Brace, Used  where metal could cause sparks.  A$ 145
#5516 Archimedean Drill, extra nice, a bit longer than most at 15".  A$ 85
#5883 Yankee #133H  Spiral Ratchet Screw Driver IOB.  A$ 75
#5840 Irwin Brace Bits IOB, set of 2 #10 .  A$ 18
#5841 Irwin #22 Dial Expansive Bit, complete IOB.  A$ 35
#5880 Yankee 30a Spiral Ratchet Screw Driver IOB, one driver bit.  A$ 65
#5882 Yankee 130a Spiral Ratchet Screw Driver IOB, one driver bit.  A$ 65
#5509 RARE Combination brace 20th Century, Patent May 1901, fantastic top knob rosewood with sap wood.  A$ 295
#5374 VERY RARE Millers Falls Ratchet Brace Drill, just about mint, when have you seen one of these.  A$ 350sold
#4936 Stanley Drill Guide.  A$ 12 sold
#5318 Goodell Pratt Automatic Drill IOB, extra set of drills.  A$ 65
#5352 Stanley #130A Spiral Ratchet Screwdriver IOB.  A$ 65
#5377 Millers Falls #5 Rosewood Handle Hand Drill, this has some fantastic rosewood in the handle, missing small handle on reverse side.  A$ 65
#5379 Johnson's Patent Automatic Drill.  A$ 72
#5378 Craftsman USA Auger Bit Set in metal case, just about new.  A$ 125
#5219 William Marples Ultimatum Brace, what can you say just a fantastic brace in G+++ condition.  A$ 1100
#5220 Alfred Ridge Ultimatum Brace again one fantastic brace, in great condition.  G+++  A$ 1100
#5221 James Howarth's Ultimatum Brace again one fantastic brace, in great condition.  G+++  A$ 1100
#5278 John S Fray & Co Wimble Brace, very nice early brace.  A$ 75
#5071 Miniature Early Hand Brace, overall just 12" long, missing locking pin at bottom, maker worn off, rare to find with good timber pad and handle.  A$ 95
#5179 Cleveland #50 Imperial Drill Stand.  A$ 75
#5180 Cleveland #54 Imperial Drill Stand.  A$ 75
#5181 Standard Tool #8 Number Drill Stand.  A$ 75
#4573

Stunning Early Boxwood Bow Drill. A beautiful tool covered in a warm patina. 9" long. Tapered square bit opening. The opening is 5/16". The boxwood spool is fine and crack-free. The boxwood handle is gorgeous and has insignificant checking.  A$ 495
#4636 Morse Twist Drill Co drill Bit Holder, pat 1902.  A$ 75
#4958 VERY RARE Combination Brace marked 20th Century and has makers name but my eyes are getting bad.  A$ 295
#4959 Millers Falls #737Corner Brace, FINE.  A$ 225
#4738 Dronfield England Corner Brass with original decal, as new condition.  A$ 225
#4739 Millers Falls #140 Corner Brace, rare design.  A$ 245
#4922 Stanley Brace #984 Corner Brace, patent pending.  Fine  A$ 225
#4681 Greenlee USA set of 8 Auger Bits.  A$ 45
#4683 Gilpin set of 10 Auger Bits.  A$ 55
#4684 Long Auger Bits, assorted makers, 3/8-11/16".  A$ 55
#3991 Jobbers Drill Stand #129 USA IOB.  A$ 25
#4643 Japan Hand Drill with screw off cap.  A$ 28
#4637 Irwin #21 Micro Dial Expansive Bit 5/8-1 1/2".  A$ 35
#4638 Irwin #22 Micro Dial Expansive Bit 7/8-3".  A$ 35
#4645 Morse's Patent Twist Drill Stand, looks like number drills, nice and original.  A$ 45
#4646 Morse Twist Drill Stand for number drills, nice timber.  A$ 45
#4151 Irwin SDS Drills, new old stock, 3 sizes, larger one 12mm $15 each small ones 8 & 6mm $12 about a 1/3 of new price.
#4269 Stanley #824 USA Hand Drill, has hollow handle with assortment of original drills.  G+++  A$ 42 sold
#4270 Millers Falls #35 18" Long Auger Extension Bit.  G+++  A$ 75
#4262 Rare Millers Falls #51 USA Angle Brace, this uses an ordinary brace at the top and the bit goes in at an angle, 16" long.  A$ 175
#4380 Fantastic Beech Brace, small check in ebony head, makers mark worn off, if it was not for the check in the ebony this one would be just about perfect.  A$ 295
#4384 16 Pc Set Of Brace Bits in timber box, most are Irwin, extra nice set.  G+++  A$ 125
#4386 Hand Drill, maker worn, nice.  A$ 18
#4383 Stanley A78 10" Hand Brace, Australian made.  A$ 38
#4471 Irwin #22 Dial Adjustable Auger IOB.  A$ 35
#4436 Stanley #H1220 USA Hand Drill IOB.  FINE  A$ 45
#4437 New Hand Drill IOB, no maker found.  A$ 30
#4430

Mint Pre-Stanley Yankee No. 41 Automatic Push Drill in its Original Box with Bits.  A$ 75

 
#4263 Very Rare Millers Falls  Angle Brace complete, rosewood handles, pat 1890, some pitting on the steel.  A$ 295sold
#4142 Thoe Ibbotson Beach with Rosewood Head, small check in head, nice brass plating.  G++  A$ 295
#3671 W M Marples Sheffield Ultimatum Ebony Brace, fantastic markings , good pad, small check in handle.  A$ 1100
#3670 W M Marples Sheffield Ultimatum Ebony Brace, small check on pad, very nice uncleaned brace.  A$ 1050
#4015 Goodall-Pratt Chain Drill, nice clean one.  G++  A$ 75
#4016 Fantastic S marked Breast Drill, 2 speed, great condition.  A$ 125
#4076 Millers Falls #502 Corner Brace, extra clean.  G++  A$ 185
#4077 Millers Falls #770 pat 1907 14" brace, rare to find this size.  A$ 75
#3630 T-Handle Auger Handle.  A$ 45
#4011 Unmarked Corner Brace with ratchet, excellent wood on this one, nice and clean, a little pitting in metal, excellent jaws.  G+  A$ 195
#4012 Millers Falls USA angle brace, pat 1907,1909, 1910.  G+  A$ 85
#3857 Millers Falls #77A Hand Drill IOB, 0 - 1/4" chuck, box is okay.  FINE  A$ 65
#2925 Rosewood Tool Holder with 8 original bits, nicest rosewood handle I have seen, Patent 1884.  A$ 125
#3599 Millers Falls USA Rare Design Brace.  A$ 155
#3600

Gorgeous Early Dutch Bit Brace  ,A beautiful iron brace. Designed to accept the early flat-tanged bits. 12 1/2" long.  A$ 255
#3597 Stanley #129 Adjustable Auger Bit.  A$ 18
#4149 Mit A Mit Australia Breast Drill #45, hard to find.  A$ 32
#4150 Small German Jeweler's Hand Drill.  A$ 28
#3578

Complete Roll of Bits for Bit Brace

A complete roll of 13 from 1/4" to 1". Also included is a small file to keep them sharp. All bits are clean and sharp and ready to use.  Nearly all of them look like Irwins. A$ 95
#3383 RARE Millers Falls #61A Spiral Screwdriver, 12" long.  G+  A$ 75
#3926 Yankee #135 Screwdriver IOB, box is excellent and screwdriver is Mint, this one comes with a complete selection of bits not just the 3 that came originally.  FINE  A$ 125
#3384 Miniature Yankee #10 Ratchet Screwdriver, 4 1/2" long.  G+  A$ 35
#3925 Yankee 2H USA Miniature Ratchet Screwdriver, this is extra nice.  A$ 35
#3268 Leytool Small Hand Drill.  A$ 25
#3065 Archimedean Drill, extra nice , great timber, nice brass, hard to find in this condition.  A$ 95
#3066 Very RARE Ilrich Hardware Co ratchet brace, patent 1884, 8" long, this is one of the rarer ratchets to find, beautiful colour in the wood.  A$ 155
#3793 Stanley Drill H12208, screw off cap.  G++  A$ 28
#2467
Charles Amidon Patent Corner Brace.  May 13, 1884 Patent.  G+  A$ 175
#3123 Marx Miniature Hand Drill, 3 3/4" long.  FINE  A$ 25
#3367 Set of 12 Brace Bits in excellent roll, mostly Irwin USA, and very little use.  A$ 95
#3339 Irwin USA set of 20 Brace bits, most have had very little use.  A$ 110
#4317

Rare Sweetheart Stanley No. 3 Bit Extension 18 Inches, Fine condition with a clear sweetheart mark. A$ 75

 
#4321 Small Hand Brace, maker worn off, some pitting but extra nice to use.  A$ 35
#4322 Stanley USA SW Hand Brace, small size, good wood.  A$ 45
#3237 Goodell Bros Millers Falls Large Breast Drill, 2 speed, patent Mar 31, 1896.  A$ 85
#4326 Stanley # 965 USA 8" Brace, good wood.  A$ 38
#4327 Stanley #923 USA 8" Brace, nice wood, extra nice brace.  A$ 48
#4323 Dunlop USA 10" Hand Brace, excellent wood.  A$ 38
#4324 Stanley #945 USA 10" Hand Brace, extra clean example.  A$ 38
#4325 Stanley #923 USA 8" Brace, nice wood.  A$ 38
#3006 Miniature Hand Brace, overall size 10" long, no maker found.  A$ 45
#3267 Very Unusual All Steel Brace, this one is extra heavy and uses taper shank drills/  A$ 65
#3298 Dunlap USA Hand Drill, screw off timber cap.  A$ 24
#3299 Qualcast Clipper England Hand Drill.  A$ 22
#3351 Greenfield Drill Stand, hard to find this one.  A$ 75
#3324 Stanley #1611 100 Plus Drill, USA Made.  A$ 28
#3328 Craftsman USA Hand Drill, all metal including screw off top, smaller size.  A$ 28
#3329 Craftsman USA Hand Drill, all metal including screw off top, larger size.  A$ 36
#3865 Irwin #21 Dial Adjustable Auger Bit IOB.  FINE  A$ 35
#3866 Irwin #22 Dial Adjustable Auger Bit IOB, does up to 3".  FINE  A$ 40
#3341 Russell Jennings #71 Expansive Bit IOB, this is when it was part of Stanley.  FINE  A$ 38
#3287 Irwin #21 USA Dial Expansive Bit IOB.  A$ 35
#3015 Extension Auger Bit to 1 1/2". ,maker worn off.  G+  A$ 17
#3017 Convale Co Extension Bit to 1 /2", USA.  A$ 18
#3019 Extension Auger Bit to 3". ,maker worn off.  G+  A$ 17
#3081 Stanley Handyman Drill with screw off cap.  A$ 24
#2958 Hand Drill, nice and fine, handle top screws off to insert bits, excellent timber, maker worn off but great quality.  A$ 45
#2952 Miller Falls #1622 10" Brace, USA.  A$ 38
#2954 Vintage Brace, knob has crack, timber in top handle is fine, nice early one.  A$ 95
#2926 Large Brace Bit reamers, 2 different sizes.  A$ 40
#2927 3 Brace Bits, assorted makers.  A$ 25
#2918 Irwin #BBM 6pc Brace Bit set IOB, 1/4" - 1".  G++  A$ 85
#3537 Bay State Drill Stand.  A$ 75
#3425 Morse Twist Drill & Mach Co Imperial Drill Stand, this one folds and is on great stand.  A$ 85
#3426 The Standard Tool Co Number Drill Stand.  A$ 75
#2964 Union Twist Drill Number Drill Index.  A$ 50
#3611 Whitman & Barnes Number Drill Stand.  A$ 75
#2880 Stewart Small Drill Stand.  A$ 18
#2929 4 Assorted Size Brace bits.  A$ 65
#2930 7 Assorted Brace bits including rare to find types.  A$ 75
#2933 Clarke USA Adjustable Auger Bit.  A$ 14
#2781 Vintage Brass and Timber Brace, maker worn off, small check in timber.  A$ 110
#2316 Early Timber and Brass Brace, small check on top otherwise no flaws.  A$ 145
T311 Nice Timber & Brass Brace, no maker, a few age cracks.  A$ 125
U302D Very Nice small Archimedean drill. A$ 35
T315 Nice Original Spiral Drill, good wood. G+  A$ 30
U292C Very Nice small Archimedean drill. A$ 25
#2052 Very Nice small Archimedean drill.  A$ 25
#2177 Spiral Drive Archimedean Drill, 8" long, very nice and clean.  A$ 25
#1901 Rosewood Handle Push Drill, screw off cap with full lot of original drills, this is one nice item.  A$ 75
#1787 Millers Falls 108 Angular Bit Stock.  G+  A$ 115
#795 Miller Falls Pat 1909 Angle Boring tool for brace.  G+  A$ 85
#1021 Yankee Chain Brace Drill, ratchet type, hard to find in this condition.  A$ 110
#2030 Jeweler's USA Hand Drill, 9" long.  A$ 24
#1831 Miniature Hand Drill, nice handle.  A$ 26 
#2480 Metabo Hand Drill, 13" long.  G+  A$ 24
#2481 Miniature Hand Drill, 9 1/4" long, maker no found.  A$ 24
#1833 Miniature Hand Drill Germany, small check in handle.  A$ 26
#1834 Miniature Hand Drill, good handle.  A$ 26 sold
#1758 Kumie Valve Grinder, Hart, Mich USA, Pat Pending, very nice early items with full brass handle.  A$ 75
#686 Miller Falls Pat Jan 14th 1868 tool handle with great selection of tool bits, some internal treads missing, outside very nice wood, rare find.  A$ 75
#997 Lutz Hill Tool Co Tool Handle with keyless chuck.  G+  A$ 55
#1914 Small Hand Drill, no maker found.  A$ 22
#3983 Dunlop USA Brace, this one has the 4 jaws and much harder to find.  G++  A$ 35
#3984 Millers Falls USA Brace, small size, pat 1890.  A$32
#3986 Stanley #921 6" brace, rosewood timber, nice early model.  G+  A$ 65
#3987 Stanley #923 10" Brace, nice timber.  G++  A$ 35
U306A Miniature hand brace, good wood, no maker.  A$ 35
U306 Miniature hand brace, good wood, no maker.  A$ 35
#2836 John S Fray USA 6" Sweep Brace, fantastic wood, hard to get size brace.  A$ 110
#2837 John S Fray USA Spofford Brace, pat 1880, 10" long.  A$ 55
#2859 RARE W A Ives #2537 10" Spofford Brace, great rosewood handle and pat, some pitting on steel but overall nice brace.  A$ 135
#2840 RARE Aeco Australia 10" long Brace.  A$ 65
#2841 Unknown Maker 15" long brace.  A$ 28
#2843 Henry Boker Early Brace plus spare frame, handle has large chip at base and both have pitting.  A$ 30
#2828 Stanley #78 England 12" Hand Brace, nice timber pad and handle.  A$ 22
#2834 Early Victor #375 10" Hand Brace, not exact on model, nice timber pad and handle.  A$ 65
#1376 Stanley USA 103 Lock Set Bit IOB, 2 1/8".  A$ 55
#2778 4 Spoon Bits for Chair makers, 2 are taper.  A$ 75
#2779 13 Assorted Spoon Bits for chair makers, some have makers.  A$ 225
T32 Snell USA Expansive Bit, replaced screw.  A$ 10
W34F Stanley USA #3800 small ratchet screwdriver.  A$ 10 
#543 Hobbies England Bow Drill, very nice drill.  A$ 85
#987 Yankee #41 Bits, assorted sizes $7 each
#2164 3 Millers Falls Automatic Screwdrivers models 100, 188A & 248, a few bits in each screwdriver.  A$ 70
#1990 5 Early Brass Push Drills, E Meuller sqr head pat 1890, Dega pat 1884, plus others.  A$ 135
#1992 15 Yankee Drills all different, hard collection to get other  than buying one at a time, let me know if you want the model numbers, all in working condition.  A$ 365
#988 Miller Falls 61A Spiral Screw Driver IOB.  G++  A$ 52
#567 Miller Falls Spiral Ratchet Screwdriver #29 IOB, box has tare.  A$ 65
T21 Miller Falls #188A Automatic Drill IOB, box tatty.  FINE  A$ 45
#1001 Ward Master's USA 84-3741 Push Drill.  G+  A$ 28
#1002 Craftsman USA Push Drill.  G+  A$ 32
#838 Ball Ratchet Screwdriver with sockets and screwdriver bits.  A$ 11
#948 Very Unusual design breast drill, no maker found, square type end.  A$ 35
#1112 Stanley England 2 Speed Breast Drill.  A$ 55
#1357 Clipper England Hand Drill.  A$ 25
#858 Witherby England 7133 Spiral Ratchet Screwdriver.  G+  A$ 35
#895 German  Spiral Ratchet Screwdriver.  A$ 18
U309 Miller Falls USA #670 Automatic Screw Driver, nice handle.  A$ 45
U324 North Bros USA # 50 Automatic Boring Tool, 15" long, good wood, most plating gone.  A$ 90
U309B 2 Goodell Pratt brass push drills, one marked Merit, different markings on each.  A$ 80
U292B Silex Australia push drill with 7 bits, part decal.  A$ 25
#2822 10 Irwin USA Brace bits in Roll.  A$ 50
#2408 10 Assorted Reduced Shank Drills from 1" down in Size, good quality drills.  A$ 70
#2108 Drill Set from 1/2" down in nice holder.  A$ 45
#2109 Frost Drill bit set, imperial.  A$ 10
#2082 29 Pc Drill Bit set, imperial, metal case, good quality set.  A$ 46
#2038 Frost 11pc Drill Set, 1/16 - 1/4" metal/wood and 5/32 - 1/4" masonry.  A$ 12
#2107 USA Made Number Drill Holder.  A$ 16
#1402 Tudor FHP Imperial Drill Stand.  A$ 18
#778 Imperial Drill Stand 1/4" - 1/2" Made in Japan.  A$ 12   3 available
  Record 1 1/4" Auger bit, new old stock.  A$ 70                      many sizes are available, just email the sizes you need.

  Atom 3/4"(19mm) x 30"(762mm).  A$ 55,  Atom 7/8"(22mm) x 16"(396mm)  A$ 47,  many more sizes available
B18 3 Spoon bits, 2 are Mathieson & 1 Gardener.  A$ 70
U303A Assorted long brace/auger bits, assorted sizes.  A$ 50
U317M Whitman & Barnes #901 6pc Auger Bit Set IOB.  A$ 32
U292 100 under 1/2" drill bits, these are quality bits.  A$ 325
U302A Nut & Bolt Gauge, metric & imperial, made of plastic.  A$ 10
U304 Wood bits 1", 7/8, 3/4,5/8, 1/2, 3/8.  A$ 12
U316 3 P & N 1/2" drills new.  A$ 25

U316A

 30 Assorted quality drill bits.  A$ 100
U323 Set of 5, very hard to get these, 25,20, 15,12,10mm.  A$ 35
  323  
  330